EMS3
The EMS-3 is a multifunction engine information display and early warning engine monitoring system. It has been specifically designed to monitor crucial vehicle information, and in the event of any engine irregularities, it will alert the driver by means of a visual and audible alarm.
With its array of advanced features, the EMS-3 is an indispensable unit for the discerning vehicle owner. Costly maintenance bills can easily be avoided by the prevention of major engine problems before they occur.
4 Programmable Inputs
Set your Own Input Name
Choose Temperature or Pressure from a range of supported sensors or calibrate your own
Multi-point calibration for custom sensors with Fine Adjustment
Hardware switches for resistive or voltage based sensors
3 Dedicated Inputs
The EMS-3 has 3 dedicated inputs that are fully configurable within their own paramaters.
CLD is the coolant Level Detector input and will give an alarm if the coolant is no seen for a preset period of time 1-10 seconds and has a sensitivity adjustment.
Output alarms can be configured when the CLD alarms.
The EGT input is the Exhaust Gas Temperature value of the exhaust gas. This is a measure of the load onthe engine as well as general health of the engine. It uses a K-Type thermocouple capable of over 1000 Deg C.
Output alarms can be configured when EGT is higher or lower than setpoints.
The EMS3 has an RPM input that can pick upp an input from the Alternator W terminal and in some cases from the ECU or other trigger.
Output alarms can be configured when RPM is higheror lower than setpoints.
Additional Functions and Screens
The EMS3 has several built-in functions.
Fan Control enables you to control a cooling fan with separate on and off setpoints triggered by coolant temperature.
The EMS3 can also Lock it’s Keypad to prevent unauthorised changes to the settings.
The built-in Hour meter / Service Timer is a great tool to keep an eye on service intervals. The hour meter can be triggered by battery voltage to ensure the engine is running when counting hours.
The Battery voltage function reads the supply voltage of the unit. 12 or 24V is no problem. You can set outputs based on battery voltage
The Multi-Value screen is very handy in that it gives you very clear overview of most of your monitored values.
Features
Additional Information
What’s in the Box ?
The EMS3 unit is supplied with a 3 meter (10ft) wiring harness, external buzzer and mounting bracket for panels from 1mm to 10mm thick.
What’s Else do I Need ?
You will need sensors andmounting adapters to the the system working.
We have a wide range of adapters and sensors to suit many applications.
These are packaged in Vehicle Specific Kits or in Function Specific Kits, or you can buy then all loose.
Where Can I Get It ?
